You will need the items below to install H-Encore. The Auto H-encore will automatically install all the nesscary files for H-Encore on the Vita. Your PS Vita must be on firmware 3.65, 3.67, or 3.68 and have a PSN account linked. If you never logged into your Vita before, just log into the PS Store ONCE. That's all it takes to link your account.

Memory Card if Fat Vita (1000's)

Either the official Sony Vita memory card or SD2Vita. Those with a PS Vita Slim won't need a memory card.

Files Needed

Auto H-Encore: Github Link
Qcma: GitHub Link

Step 1: Unzip and Install all Files

QCMA Setup
  • Unzip the Auto H-encore files and install Qcma.
  • Select the libusbK driver when installing Qcma.

Step 2: Run Auto H-Encore.exe

Auto Hencore pt2
  • Double click on the auto h-encore.exe icon and click on the Start button.

Step 3: Connect Vita to QCMA.

Auto Hencore pt3
  • A prompt will popped up asking to connect the PS Vita.
  • To do so, connect the USB cable to your Vita and go to Content Manager.
  • Select Copy Content.

Step 4: Wait for Unpacking to Finish.

Auto Hencore pt4
  • Wait for the prompt to reach 100% unpacked.

Step 5: Copy H-Encore to PS VITA/APP.

Auto Hencore Final Step
  • In the PS Vita, connect to Content Manager.
  • Select Applications/PS Vita/ H-Encore.
  • Select H-Encore and hit Copy.

Step 6: Go Back Out to the Home Page and Click on the H-Encore Bubble!

  • Go out to your HOME page.
  • Scroll down until you see the bouncing H-Encore bubble.
  • Launch H-Encore, scroll down to Install HENkaku press X.
  • Download VitaShell and press X (WiFi must be turned on).
  • Reset taiHen config.txt and press X, and then press X on Exit.



Step 7: Rejoice!

Vitashell with Encore

You should have VitaShell now. This app allows you to install other apps on your Vita.

Enjoy your hacked Vita, to see a pic by pic guide on how to install Enso, a permanent hack, see my next guide here.

72 thoughts on “Auto Install H-Encore”

  1. Hi, I’m on a vita 2000 model running 3.73. I’m not a tech genius but there are lots of great tutorials for moving vitas and thought I’d give it a go! I got as far as getting h-encore2 onto the vita fine, I can reach the bootstrap menu, and install HENkaku, but it fails EVERYTIME I try to download Vitashell! I’ve tried everything from VPN’s, formatting memory, re-downloading and re-installing h-encore multiple times and I even did a complete factory reset on the vita to start a fresh! Nothing works! It fills on the very first step ‘Downloading eboot.bin…’ then says ‘Failed! 0x8041013D’. It seems this happens to others but most people say that deleting WiFi connection and re entering WiFi password normally works, or a vpn. Not for me! I must also state that I’m in China, I hope somebody has some good ideas pleeeeeease! I really want to mod my vita. Thanks in advance.

  2. I keep getting the white screen when I launch h-encore. I am reading that I need to repeat the process. Repeat as in re-open the app on the Vita? Or re-install it onto the Vita (using auto h-encore)?

  3. I got through steps 1-4 fine, but when I got to step 5 it kept asking me to update the system. I followed your tutorial on spoofing / blocking the update notification, but now whenever I try and connect my Vita to my PC it says that it cannot connect. I’ve tried different USB cables and ports and it still just says that. I can hear my Vita connection to my PC, but still it says it can’t connect on my Vita. I tried restarting my computer and Vita it still won’t connect. Help!

      1. The only other thing I can think of for your PS Vita not connecting is are you sure your USB cord is a data transferring cord, not all are.

        1. This particular step frustrated me! But yes, after the right data transferring cord, I managed to escape the “update firmware” loop after I restarted my vita beforehand

          1. The cord issue frustrated me too, I remember spending hours trying to download the right driver so my PC can recognized the Vita when it was all because I had a cheap micro usb cord.

  4. i have been following the steps from about 3 pages ago and i had already installed H-encore2 on my vita, following the links step by step i now come up on a process that wants me to overwrite h-encore2 with h-encore. should i overwrite it or not?

  5. I’m using a 1000 with 3.65, and when i run auto h-encore.exe, I get to the part where it asks me to plug in the Vita to my PC, and then qcma starts freaking out and opening and closing multiple times in a row, and it doesn’t do anything. I’ve tried reinstalling qcma with all three of the driver options, and nothing’s worked.

    1. Even restarting both the Vita and the PC, have you tried with a different USB cord. Otherwise I would try to connect to the PC through wifi instead of USB.

  6. Hello, I have a ps vita which is running on 3.73. I installed h-encore but on my ps vita it is showing a white screen. I have a mac, and that is why I only could install H-encore 1.5v. What should I do now?

  7. Hi, I have a question, I did all the steps for Verification 3.65; I bought 4gb official sony card, and when I try to boot to a memory (sd2vita pro adapter of 64gb samsung class 10), the console freezes all, does not walk, or lets me turn it off, it only works again when I take out the adapter. I didn’t find any solution for that. Do you have any idea what it could be?

  8. Hello, I have a vita slim 2000 model running 3.67 with absolutely nothing installed on it. I do not have an account linked to my vita at this time and it asks me to update my system whenever i try to link an account to it. I know that I dont want to be updating my system at all, but the first paragraph on this page says that i need a PSN account to be linked to my system. What should I do from here?

    Thank you!

  9. Hello, i followed every step discussed here for the henkaku hack and installed it but now whenever i try to launch h-encore to install vita shell, the app either hangs or goes back to home menu. It doesn’t even give an error message. What could be the cause?
    I recently downgraded from 3.70 to 3.5 using modoru. And I’m yet to delete the modoru app.

  10. I keep on getting stuck trying to copy h encore to vita. I have a fresh vita on 3.65 and each time it tries to make me update the software. I’ve tried turning off wifi and using CMA but that doesn’t connect to my pc. Is it worth just updating to 3.70 and using Trinity? Any thoughts?
    Thanks in advance.

      1. Thanks for the speedy response. I had already followed those steps. It still lands on the update page. Is there any other info I can give you to maybe shed some light?

        1. Hmmm, I don’t really have much other information except turning on airplane mode and then shut off the Vita. Then turn it on and test it out. Is it only asking you to update when you try to use QCMA, does the Vita prompt you to update anywhere else?

          1. When I try to connect to PSN I get it then. I’ve tried some other DNS settings I’ve found on other sites, as well as the airplane mode solution. I’ve tried resetting the system and running H encore at various parts of the sign in process. A brief search shows this has effected other consoles too. All is not lost. I think I will just update and try the Trinity route.

  11. Hi there! Good day, i’ve been reading this thread about installing H-Encore, i have ps vita slim running in 3.63 but this guide mention that i should be on 3.65, 3.67 or 3.68 for this to work? is there anything that i can do or available so that i can also install it on 3.63?

    i hope i could get a response:)
    Thank you very much

    1. No unfortunately, you have to upgrade your firmware because H-encore is not designed to run on anything lower than 3.65.

  12. This is such a good website it has inspired me to hack my PlayStation Vita 3.68 I just hope I can do all the things on my Linux computer. I know I should just change my computer back to Windows because Linux pretty worthless for me.

    Thanks for all your hardwork

    1. Not yet, but it is coming. The creator of H-Encore (TheFlow) has found a way to hack Vitas above 3.68 and he said he will release it in 6-8 weeks. Therefore, in May or June there should be a hack. I am currently working on a guide for that, because there are some things you can do right now to prepare your Vita for that upcoming hack.

  13. Hello CFWConsoles, your guide is very helpfull.. My thanks for your splendid hard work to make this guide.. If you really dont mind, can you make a guide for modoru by TheFlow? it can make your cracked vita downgrade to your desire FW, i really appreciate if you make this guide..

    thank you for your splendid work..

      1. Woooow, great.. Thankyou CFWConsoles.. maybe one day you can make guide to install MaidumpTool or Vitamin here… Great….

        1. Thanks for the suggestion Raizo, I will add Vitamin to my to do list as it seems important for people to back up their legit games especially if they use SD2Vita. However, I would recommend NoNPDRM instead of Maidump. NoNpDrm is a more stable and superior format than Mai.

          1. Yep.. NoNpDrm more stable..

            CFWConsoles, cant wait for your another guide about modoru and vitamin, geat work out there..

  14. Everything went fine with the whole installation until step 14. The Henkaku installed properly, but when I tried to download Vitashell, it failed. When I tried again, h-Encore crashed. I keep trying to open it and either the app crashes or the Vita does. Deleted the app and copied it again, the crashes continue. I’m running 3.68. Did I miss a file somewhere?

    1. Look at the new guide, I am now showing an automatic install with half the steps needed. Let me know if you are still having issues.

  15. help please!!!!am stuck at step 11 it says that is a batch file and therefore no new folders created. i have followed the other steps but step 11 is really frustrating. please help anyone.

    1. Look at the new guide, I am now showing an automatic install with half the steps needed. Let me know if you are still having issues.

    1. You will have to wait, there should be a hack coming out during 2019 that will enable you to hack on 3.70 and then downgrade to a lower firmware.

  16. hi i have fat ps vita in 3.68. its resetted but i cant deactivate the ps vita from my psn account remotely and it requires vita updating to login to my psn account.. pls help

      1. I seem to be having the same issue. Not sure what’s gone wrong, but I keep getting error code c2-12858-4. It’s a slim vita, connected to my pc via USB. I select h-encore to copy, it starts the process, the bar fills up about halfway, then the error message appears. My h-encore file is much smaller than the one you’ve got in your picture, though. You’rs is 243mb, mine is 1104kb… perhaps I did something wrong? Well, I sure hope you’re still replying to these…

        1. Where did you get the Hencore file, my guide shows you how to make it yourself. If you using of those smaller Hencore as a shortcut you can skip I believe the first 6 steps.

          1. Wow, I didn’t expect a response so fast! I had waited a few days before trying this again. All the files I got were from this guide’s provided links. I’m 100% unsure of what I did wrong, but I deleted everything and started over from step 1, making extra sure to have everything look like the pictures, and it worked this time. Thanks for this guide, it may have taken me a minute to do it (because I’m a total noob at this stuff, it’s the first console I’ve ever hacked!), but I couldn’t have done it without this guide!

  17. hey, thanks for the perfect guide, now i need your help here. i did everything right and i have h-encore app on my vita, look i’m on 3.65 enso, what should i do before i install h-encore? remember that i want to be on 3.68, so please tell me what i should do to be on 3.68 h-encore while i’m on 3.65 enso?

    1. You should update to 3.68 first and then install the H-encore. You should be able to update by going into Safemode (PS button + Power button + R1) when booting up your Vita and pick update software.

      1. so updating like the normal way? no need to delete any plugin, suprx or uninstall enso? nothing will happen to my vita if i update from my 3.65 enso to 3.68 ofw?

          1. thank you, now the only problem is i don’t have an option to update my vita in settings menu, and when i tried via pc while vita in safe mode tells me that i have the latest version :/

          2. Try going to HENkaku Settings and see if “Enable Version Spoofing” is checked, if it is then unchecked it. If it’s not then I’m not sure, also I guess you have some games you want to play on 3.68 because there is no turning back.

  18. Hi. Umm i dont see a Vitashell folder in the PS Vita/APP/xxxxxxxxxxxxxxxx directory and also in contents manager. i only have the h-encore there. Please help 🙂 Thanks.

    1. Follow my corrected step 14, but you basically launch the H-encore bubble and go through each menu item with exit being last. That should install Vitashell for you.
      Actually this was from me doing my other guide on how to restore VitaShell, if you are doing this for the first time you won’t see it there.

    1. Good suggestion! I do have a mac laptop, I can get that done. I have never used Linux before but I’m that won’t difficult.

Leave a Reply to CFWConsoles Cancel reply

Your email address will not be published. Required fields are marked *